MASONRY
Fine powder
Tata Shudh Masonry cement is manufactured using the best quality clinker made of high-quality limestone. Masonry cement ensures economy while providing quality at the time of construction.

-
Masonry construction
Masonry cement is used to produce masonry mortar for use in brick, block and stone masonry in all types of plastering work, in commercial, industrial and residential works.
-
Usage
Do not use masonry cement for concreting jobs, including pre-stressed concreting.
-
Preparation
Prepare at the rate of usage so it doesn’t stiffen.
-
Freshness
Mortar older than 1.5 hours should be discarded.
-
Workability
Restore workability by adding water or tempering.
Characteristics | Test results | Requirements of IS : 3466 - 1988 |
---|---|---|
Fineness % (Residue on 45 micron IS sieve) | 10 - 12 | Maximum : 15 (By wet sieving) |
Setting time a) Initial (in minutes) b) Final (in minutes) | 100 - 115 180 - 200 | Minimum: 90 Maximum: 1,440 |
Soundness a) Le-chatelier expansion Unaerated cement (mm) b) Autoclave expansion Unaerated cement (%) | 0.0 - 1.0 0.01 - 0.03 | Maximum: 10 Maximum: 1% |
Compressive strength (Mpa) (50 mm mortar cubes) 7 days 28 days | 10 - 13 17 - 20 | Minimum: 2.5 Mpa Minimum: 5.0 Mpa |
Freezing point | 8 - 11 | Minimum: 6% |
Air content (%) | 68 - 72 | Minimum 60% of original flow |
Water retention (%) | - | 27 2 |
Temperature © |
-
ORDINARY PORTLAND CEMENT
Tata Shudh OPC is a high-grade performance cement specially formulated to offer superior compressive strength.
-
BUILTONIC®
Builtonic® is a precast concrete that is prepared, cast and cured off-site. It offers faster demolding, higher productivity and better end quality products.
-
PORTLAND POZZOLANA CEMENT
Portland Pozzolana Cement (PPC) is a blend of Ordinary Portland Cement (OPC) and pozzolanic materials, such as fly ash or calcined clay.
